Behind-the-Neck style
The new SM1PW series elevates Sensear’s portfolio of smart headsets by providing some new features and benefits to improve safety, reliability, and efficiency. This new industrial headset offers a robust design adhering to higher noise reduction standards of up to 27dB NRR depending on the headset wearing style. It’s upgraded Bluetooth® module allows for the streaming of audio to the headset, a valuable feature for users that listen to music during long work shifts in high-noise environments. The headset uses Sensear’s SENS® technology to enhance speech and suppress noise while the noise-cancelling boom mic filters out background noises so that only speech is transmitted through the microphone.
Sensear’s workgroup headsets enable clear headset-to-headset communication in noisy industrial environments through a built in short range radio.
Users of the SM1PW benefit from its wireless communication capabilities at short range while at the same time integrating with existing two way radio systems or Bluetooth® solutions allowing workers to be part of the wider network.
| IP Rating | IP54 | ||
| Power (Non-IS model) |
2650mAh Lithium Polymer Battery, 18 hours (wireless with Bluetooth/Short Range activated), 5 Hour Charge Time
|
||
| Power (IS model) | 2250mAh |
||
| Volume limiter | 82 dB(A) [programmable] – only applicable when the headset is powered on | ||
| Region | Australia / NZ | USA / Canada | Europe |
| Standard | AS/NZS 1270 | ANSI S3.19 | EN352-1/EN352-3 |
| Result | SLC80 | NRR | SNR |
| HB | 31 dB, Class 5 | 27 dB | 33 dB |
| BTN | 27 dB, Class 5 | 24 dB | 30 dB |
| HM | 26 dB, Class 5 | 23 dB | 31 dB |
| SENS® 360o Situational Awareness | 95 dB(A) | ||
| Voice transmission |
Boom microphone – noise cancelling, VOX capable |
||
| Face-to-face | Sens® mode (< 95 dB) | ||
| Two-way radio |
Bluetooth only |
||
| Short range |
Half-duplex communications, Up to 8 programmable FM channels, Up to 50 meters |
||
| Bluetooth | Bluetooth® 3.0, 15 meters (49 feet) | ||
• Intrinsically safe SM1PW-IS series certified to: TIA-4950-A, CSA C22.2 No.
157.92, & UL 913 5th Edition with a hazardous location rating of Class I, II, III,
Division 1 & 2, Groups A - G, T4 -20°C to +40°C, T3C -20°C to +50°C
These products are sold separately 
|
SMHA0000
Smart Muff Hygiene Kit |
SMBMHK01
Smart Muff Boom Microphone Wind Sock x5 |
SMWS0001
Smart Muff Wind Protector Kit |
|
SMAP0000
Smart Muff Absorbent Pads x5 Pair |
SMBM0001
Smart Boom Microphone (for non-IS Headets only) |
MFP0014800I
Smart Boom Microphone (for IS Headets only) |
|
SMBB0000
Smart Muff HB Replacement |
SMBE0000
Smart Muff BTN Replacement |
SMMK0001
Smart Muff HM Replacement |
|
SMHA0006
Smart Muff HM Adaptor |
SMHA0001
Smart Muff HM Adaptor |
SMHA0002
Smart Muff HM Adaptor |
|
SMPW0001
SM/SP Universal Wall Charger |
SMPW0002
SM/SP Vehicle Charger |
PRGTAB01
Programming tablet |
|
|
zheng henry |
| 03/01/20 09:51PM | |
|
| |
| We need the SM1P02 Ex series |
|
|
Monte B. Doan |
| 03/09/20 10:30AM | |
|
| |
| I am using the headsets as I write in class for the first time. VERY VERY SATISFIED. I would recommend them to anyone. |
